Decovision

LED Cornice Coving for Ceilings, XPS Extruded Polystyrene Moulding FB Series

Model

Product Sİze

Length

(0)

£1.95

In stock - Ready to be shipped

Estimated delivery between August 05 and August 07. Order within .

Quantity

The FB Series is Decovision's statement LED coving: five bold profiles at 105 mm deep, designed for rooms that deserve more than a token trim. Every length is UK-made from XPS (extruded polystyrene) — a smooth, dense, closed-cell foam that finishes like plaster once painted, but weighs so little that fitting it is a one-person job.

Lighting built into the profile

Behind the upper edge of each FB profile runs a concealed LED channel. Slide a strip in and the ceiling picks up a wide, even wash of indirect light — dramatic in the evening, invisible during the day. The LED strip itself is not included, leaving the choice of warmth and brightness to you.

Serious size without the plaster problems

In plaster, a cornice this size means two installers, mechanical fixings and a nervous look at an older ceiling. In XPS (extruded polystyrene) it means one person, a tube of solvent-free adhesive and no load worth mentioning. The material flexes with the building rather than cracking, and its closed-cell structure resists moisture where plaster slowly fails.

Models and sizes

Five designs: FB-34, FB-35, FB-36, FB-37, FB-38
Two sizes each: A (105 x 190 mm) and B (105 x 290 mm)
Sold in 2 m lengths; packs from 2 m to 30 m (16 lengths)
Matching internal and external corner pieces, ready-made (20 cm)
20 cm sample for judging scale and testing paint — not for installation use

Installation

Adhesive must be solvent-free and paint must be water-based — both rules exist because solvents attack polystyrene. No screws or drilling. Cutting is quick with a fine-tooth saw, and ready-made corners remove the most error-prone mitres. Plan two to four hours for a typical room.

Rooms that suit the FB

Generous living rooms, dining rooms, master bedrooms and hallways with height to spare. Kitchens and bathrooms work too, thanks to the moisture resistance of XPS (extruded polystyrene).

Why Decovision

Large-format profiles in genuine XPS (extruded polystyrene), factory corners, UK manufacture and an affordable sample service. Order the FB sample, offer it up to your ceiling, and see how much difference 105 mm makes before committing to the full packs.

The completeness check carried out before installation is essential for a trouble-free application. These are the same instructions included in print with every package.

1. Package opening and inspection

Open the package from both ends.
The products are numbered. The numbers do not indicate an installation sequence - they are only provided to help you verify the package contents.
Whatever quantity of lengths you purchased, check the numbers inside the package to confirm it is complete.

Protective pieces: the small foam pieces and fillers inside the package are not part of the product. They are for protection in transit only, are not used during installation and can be discarded.

2. Corner pieces inspection

If your order includes internal or external corners, they may be inside the same package - or, if they did not fit the length, they may have been sent as a separate parcel. Please check the main package and any additional package.

Important: if any product is missing or damaged, contact us before starting installation.

3. Corner installation options

Option 1: corners can be cut by the user at a 45-degree angle using a mitre box.

Option 2 (recommended): pre-made corners purchased from us consist of two pieces already cut at 45 degrees. Install the corners first, followed by the intermediate sections - this gives a faster and cleaner result.

4. Required materials

Solvent-free coving adhesive
Utility knife or fine-toothed saw
Acrylic sealant or joint filler
Caulking gun
Tape measure and pencil

5. Installation

The wall and ceiling surface must be clean and dry.
Apply the adhesive to the contact surfaces of the coving.
Press the product firmly into place.
Wipe away excess adhesive with a damp cloth.

6. Finishing and painting

Fill the joints with sealant.
Once dry, lightly sand if necessary.
Paint with two coats of water-based paint. Never use solvent-based paints or adhesives on polystyrene.

7. Usage information

Lightweight - can be wiped clean with a damp cloth.
Decorative trim: it does not bear loads, so never hang anything from it.

Support

If you have any questions before starting the installation, please contact us. We are pleased to help with any issues that may arise during installation.

Orders are packed with care and delivered across the UK. Full-length boards and coving travel as 2-metre parcels with our specialist carrier.

Most items can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, we cover the return; for change-of-mind returns the postage is payable by the customer. Samples are for testing only and are non-returnable unless faulty. Your statutory rights are not affected.

Full details: see our Returns & Refunds policy.

Pay with

Your transaction is protected with advanced security measures to keep your information confidential

LED Cornice Coving for Ceilings, XPS Extruded Polystyrene Moulding FB Series

£1.95

Ultra lightweight

One person fits it with adhesive alone - no drill, no plasterer, no load on old ceilings.

Crack-resistant

XPS (extruded polystyrene) flexes with your building instead of cracking along the ceiling line like plaster.

Ready-made corners

The hardest cuts arrive already done - internal and external corner sets are available for every profile.

Order a sample first

See the profile in your own light.

A 20 cm sample shows the exact surface, colour and profile of the full-length product - from £1.95. Hold it against your ceiling before you order the room.

Order a sample

Compare profiles side by side.

Sizes, prices and finishes of related coving series at a glance.

Explore the LED range.

LED Cornice Coving for Ceilings, XPS Extruded Polystyrene Moulding VLS Series