Decovision

LED Cornice Coving for Ceilings, XPS Extruded Polystyrene Moulding DV-LO Series

Product Sİze

Length

(0)

£7.90

In stock - Ready to be shipped

Estimated delivery between July 14 and July 16. Order within .

Quantity

The DV-LO Series is a slim lighting coving — a compact 100 x 50 mm profile whose whole job is to carry LED strip light around a room, cleanly and invisibly. Cut from XPS (extruded polystyrene), the dense closed-cell foam that paints smoothly and weighs next to nothing, and manufactured in the UK by Decovision.

A dedicated home for LED strip

Where a traditional cornice is decoration first and lighting second, the DV-LO reverses the priority: a discreet border that tucks an LED strip out of sight and turns it into a continuous line of indirect ceiling light. Choose from ten profile designs (DV-LO11 to DV-LO20), all sharing the same compact 100 x 50 mm footprint. LED strip is not included, so the colour temperature is your call.

Featherweight by design

A profile this small in XPS (extruded polystyrene) is genuinely featherweight — you can fit an entire room without a ladder partner, adhesive alone holding every length. There is no measurable load on the ceiling, which makes the DV-LO a safe upgrade even for fragile lath-and-plaster ceilings in period homes, and it will not crack as the structure moves.

Sizes and ordering

Ten designs: DV-LO11 through DV-LO20, all 100 x 50 mm
2 m lengths; packs from a single length up to 30 m (16 lengths)
Ready-made internal and external corners (20 cm)
Approx. 20 cm sample for profile and paint testing — not for installation

Fitting

Bond with solvent-free adhesive only and decorate with water-based paint only; solvent products damage polystyrene. No drilling or screws. Because the profile is small and straight, most rooms are finished well inside an afternoon.

Where slim lighting coving shines

Bedrooms and snugs where you want glow without glare, media rooms and home cinemas, hallways, and above kitchen units. The closed-cell structure of XPS (extruded polystyrene) handles humid rooms without complaint.

Why Decovision

A purpose-made LED profile rather than an adapted cornice, ten designs in genuine XPS (extruded polystyrene), UK manufacture, factory corners and a cheap sample. Start with the sample, check the scale against your ceiling, then light the whole room.

The completeness check carried out before installation is essential for a trouble-free application. These are the same instructions included in print with every package.

1. Package opening and inspection

Open the package from both ends.
The products are numbered. The numbers do not indicate an installation sequence - they are only provided to help you verify the package contents.
Whatever quantity of lengths you purchased, check the numbers inside the package to confirm it is complete.

Protective pieces: the small foam pieces and fillers inside the package are not part of the product. They are for protection in transit only, are not used during installation and can be discarded.

2. Corner pieces inspection

If your order includes internal or external corners, they may be inside the same package - or, if they did not fit the length, they may have been sent as a separate parcel. Please check the main package and any additional package.

Important: if any product is missing or damaged, contact us before starting installation.

3. Corner installation options

Option 1: corners can be cut by the user at a 45-degree angle using a mitre box.

Option 2 (recommended): pre-made corners purchased from us consist of two pieces already cut at 45 degrees. Install the corners first, followed by the intermediate sections - this gives a faster and cleaner result.

4. Required materials

Solvent-free coving adhesive
Utility knife or fine-toothed saw
Acrylic sealant or joint filler
Caulking gun
Tape measure and pencil

5. Installation

The wall and ceiling surface must be clean and dry.
Apply the adhesive to the contact surfaces of the coving.
Press the product firmly into place.
Wipe away excess adhesive with a damp cloth.

6. Finishing and painting

Fill the joints with sealant.
Once dry, lightly sand if necessary.
Paint with two coats of water-based paint. Never use solvent-based paints or adhesives on polystyrene.

7. Usage information

Lightweight - can be wiped clean with a damp cloth.
Decorative trim: it does not bear loads, so never hang anything from it.

Support

If you have any questions before starting the installation, please contact us. We are pleased to help with any issues that may arise during installation.

Orders are packed with care and delivered across the UK. Full-length boards and coving travel as 2-metre parcels with our specialist carrier.

Most items can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, we cover the return; for change-of-mind returns the postage is payable by the customer. Samples are for testing only and are non-returnable unless faulty. Your statutory rights are not affected.

Full details: see our Returns & Refunds policy.

Pay with

Your transaction is protected with advanced security measures to keep your information confidential

LED Cornice Coving for Ceilings, XPS Extruded Polystyrene Moulding DV-LO Series

£7.90

Ultra lightweight

One person fits it with adhesive alone - no drill, no plasterer, no load on old ceilings.

Crack-resistant

XPS (extruded polystyrene) flexes with your building instead of cracking along the ceiling line like plaster.

Ready-made corners

The hardest cuts arrive already done - internal and external corner sets are available for every profile.

Order a sample first

See the profile in your own light.

A 20 cm sample shows the exact surface, colour and profile of the full-length product - from £1.95. Hold it against your ceiling before you order the room.

Order a sample

Compare profiles side by side.

Sizes, prices and finishes of related coving series at a glance.

Explore the LED range.

LED Cornice Coving for Ceilings, XPS Extruded Polystyrene Moulding VLS Series