Products

Transform Your Walls with a Stunning 3D Mirror Effect

Looking for a quick, stylish way to refresh your walls without the cost and hassle of traditional renovations? DECOVISION 3D Mirrored Wall Panels bring a sleek, contemporary look to any room in minutes. Crafted from acrylic-based PVC with a micro-cellular structure, these panels deliver a beautiful mirror-like finish that adds depth, light and a spacious feel to your living space.

What's Included

• Each pack contains 4 panels
• Each panel measures 50 x 50 cm (500 x 500 x 1.3 mm)
• Weight per panel: 435g
• One pack covers 1 m² of wall area

Key Features

• Waterproof & Fireproof – High resistance to moisture and heat, ideal for bathrooms, kitchens, en-suites and high-humidity areas.
• Lightweight & Easy to Install – Simply apply acrylic mastic adhesive to the back of each panel and press onto a clean, dry wall. No drilling or specialist tools required.
• Easy to Cut & Customise – Score the back with a standard utility knife and snap along the line to fit around sockets, corners and edges.
• Paintable – Once installed, paint in any colour using water-based, acrylic, spray or automotive paint for a fully customised look.
• long-lasting PVC Construction – Micro-cellular acrylic-based structure ensures long-lasting performance and easy maintenance with a damp cloth.

Perfect For

Living rooms, bedrooms, hallways, dining areas, dressing rooms, bathrooms, en-suites, kitchens, feature walls, accent walls and commercial spaces. These panels are designed to make small rooms appear larger and brighter with their reflective mirror finish.

Available Designs

Choose from two elegant geometric patterns:

• Lima – Flowing, organic geometric design
• Idea – Sharp, modern geometric design

Available in three coverage options: 1 m² (4 panels), 2 m² (8 panels) and 4 m² (16 panels).

How to Install

1. Ensure the wall surface is clean, dry and smooth.
2. Apply acrylic mastic adhesive in spots or lines to the back of each panel.
3. Press the panel firmly onto the wall and hold for a few seconds.
4. If needed, cut panels from the back using a utility knife.
5. Allow 24 hours for the adhesive to fully cure before painting (optional).

Specifications

Frequently Asked Questions

These acoustic slat wall panels bring warm, modern texture to a room while softening noise and echo. Each panel combines a 6mm MDF core with a 3mm acoustic felt surface, so the slatted face you see is backed by a layer that absorbs sound rather than bouncing it around the room. At 275 x 100 cm, a single panel covers a generous stretch of wall or ceiling in one piece.

Specifications

• Panel size: 275 x 100 cm (full-height coverage for most UK ceilings)
• Construction: 6mm MDF core with 3mm acoustic felt surface
• Style: slatted wood-effect acoustic panelling
• Finishes: available in three finish options
• Suitable for walls and ceilings

Why acoustic slat panels

Open-plan rooms, hard floors and bare plaster walls all reflect sound, which is why a room can feel echoey and tiring. The felt layer behind the slats absorbs a portion of that reflected sound, taking the harsh edge off conversations, television and music. The result is a calmer-sounding room and a feature wall in one product.

Installation

Panels are light enough for straightforward DIY fitting. Fix them with a solvent-free grab adhesive, or screw them through the felt backing into the wall for a removable installation. They can be cut to size with a fine-tooth saw to work around sockets, corners and sloping ceilings. An average feature wall takes an afternoon.

Where to use them

A natural fit for home offices and studies where video calls need clearer sound, living rooms and snugs, bedrooms, home cinemas, and hallways or stair walls that carry noise between floors.

Why Decovision

Decovision specialises in lightweight interior mouldings and panelling that one person can fit without a contractor. If you are planning a larger project, browse our coving and ceiling collections to match your walls and ceiling in one style.

A high-performance water-based acrylic montage adhesive suitable for wood, PVC, gypsum, ceramic, decorative panels and lightweight construction materials. Low-odour, paintable and ideal for interior and exterior applications.

Akfix 310 is a water-based acrylic montage adhesive designed for bonding lightweight construction materials with strong initial grab and long-lasting adhesion. Its solvent-free and low-odour formula makes it perfect for indoor use, while its weather-resistant structure also performs well outdoors. Suitable for DIY projects, professional installations, panel fixing, moulding, skirting, ceiling roses, coving and more.

Key Features

• Water-based acrylic formula – Safe, low-odour and solvent-free.
• Fills gaps on uneven surfaces – Ideal for rough, porous or irregular areas.
• Strong initial bond strength – Ensures fast and secure installation.
• Weather-resistant – Suitable for indoor and outdoor applications.
• Paintable surface – Can be painted after curing for seamless finishes.
• Non-toxic, low odour, environmentally friendly.

Recommended Applications

Perfect for bonding:

• Wood, MDF, plywood, chipboard
• Ceramic, tiles, plaster, gypsum boards
• Felt, fabric, synthetic materials
• PVC panels and decorative wall cladding
• Skirting boards, mouldings, coving, trims
• Ceiling roses and decorative architectural elements

Ideal for: kitchen, bathroom (non-permanent water contact), living room, commercial interior installations.

Technical Specifications

Packaging Information

Upgrade your sealing and insulation projects with premium aluminium foil tape, engineered for reliable adhesion and effective light blocking. Suitable for both professional tradespeople and DIY enthusiasts, it delivers dependable performance across a wide range of applications.

• High-quality aluminium foil construction for enhanced durability and tear resistance
• Strong adhesive backing provides a secure bond to a variety of surfaces
• Reflective foil layer helps reduce unwanted light penetration and light bleed
• Performs effectively in both hot and cold temperature environments
• Creates a dependable barrier against moisture, dust, and air leaks
• Designed for long-lasting performance without lifting or peeling
• Ideal for insulation, sealing, repairs, HVAC applications, and home improvement projects
• Easy-release backing allows for quick, clean, and hassle-free installation

Combining durability, flexibility, and excellent light-blocking properties, this aluminium foil tape is a practical solution for insulation, sealing, repairs, and applications where a professional finish is essential.

The DV-LO Series is a slim lighting coving — a compact 100 x 50 mm profile whose whole job is to carry LED strip light around a room, cleanly and invisibly. Cut from XPS (extruded polystyrene), the dense closed-cell foam that paints smoothly and weighs next to nothing, and manufactured in the UK by Decovision.

A dedicated home for LED strip

Where a traditional cornice is decoration first and lighting second, the DV-LO reverses the priority: a discreet border that tucks an LED strip out of sight and turns it into a continuous line of indirect ceiling light. Choose from ten profile designs (DV-LO11 to DV-LO20), all sharing the same compact 100 x 50 mm footprint. LED strip is not included, so the colour temperature is your call.

Featherweight by design

A profile this small in XPS (extruded polystyrene) is genuinely featherweight — you can fit an entire room without a ladder partner, adhesive alone holding every length. There is no measurable load on the ceiling, which makes the DV-LO a safe upgrade even for fragile lath-and-plaster ceilings in period homes, and it will not crack as the structure moves.

Sizes and ordering

• Ten designs: DV-LO11 through DV-LO20, all 100 x 50 mm
• 2 m lengths; packs from a single length up to 30 m (16 lengths)
• Ready-made internal and external corners (20 cm)
• Approx. 20 cm sample for profile and paint testing — not for installation

Fitting

Bond with solvent-free adhesive only and decorate with water-based paint only; solvent products damage polystyrene. No drilling or screws. Because the profile is small and straight, most rooms are finished well inside an afternoon.

Where slim lighting coving shines

Bedrooms and snugs where you want glow without glare, media rooms and home cinemas, hallways, and above kitchen units. The closed-cell structure of XPS (extruded polystyrene) handles humid rooms without complaint.

Why Decovision

A purpose-made LED profile rather than an adapted cornice, ten designs in genuine XPS (extruded polystyrene), UK manufacture, factory corners and a cheap sample. Start with the sample, check the scale against your ceiling, then light the whole room.

LED Coving for Ceilings by Decovision, DV-U0 Series

LED cornice covingthat upgrades any room with warm, indirect lighting. Made from XPS (extruded polystyrene)— a dense, smooth, closed-cell foam that is far finer-finished than the bead-style polystyrene you may know, yet so light you can hold a full 2-metre length overhead with one hand.

Ultra Lightweight by Design

Each length weighs a fraction of traditional plaster coving. That means one person can fit an entire room without help, ladders stay safe, and there is virtually no load on ageing ceilings — ideal for older UK homes where heavy plaster mouldings crack as the building moves. XPS (extruded polystyrene) flexes with natural micro-movement instead of cracking.

Built-In LED Channel

The rear channel is shaped to hold standard LED strip lights (not included), casting a smooth, indirect glow across your ceiling. Perfect for living rooms, bedrooms, kitchens and media walls — a designer lighting effect without an electrician rewiring your ceiling.

Sizes & Pack Options

DV-U0 Series models DV-U01 to DV-U05, each available in four profile sizes: A (80x40mm), B (100x150mm), C (120x60mm), D (150x76mm).

Each full length measures 2 metres. Packs from 2m up to 30m, plus ready-made internal and external corner pieces so you never need to cut a tricky mitre joint.

Sample pieces are approx. 20cm long and are intended for checking the profile, material and paint finish only — they are not suitable for installation.

Simple DIY Installation

No nails, screws, drills or specialist tools. Fix with a solvent-free adhesive only(solvent-based adhesives damage polystyrene) and paint with water-based emulsion only— the smooth XPS (extruded polystyrene) surface takes paint beautifully with no bead texture showing through. An average room takes one person around 2–4 hours.

Where It Works

Living rooms, bedrooms, kitchens, hallways and home offices. The closed-cell structure of XPS (extruded polystyrene) resists moisture, so it stays stable in kitchens and bathrooms where plaster deteriorates.

Why Decovision

UK-based coving specialist. Premium XPS (extruded polystyrene) profiles — not bead-style EPS foam — with crisp detailing, matching corner pieces, and sample pieces available for every profile so you can see and feel the quality before you order.

Order a sample todayand test the profile, finish and paint in your own room before committing to a full pack.

The FB Series is Decovision's statement LED coving: five bold profiles at 105 mm deep, designed for rooms that deserve more than a token trim. Every length is UK-made from XPS (extruded polystyrene) — a smooth, dense, closed-cell foam that finishes like plaster once painted, but weighs so little that fitting it is a one-person job.

Lighting built into the profile

Behind the upper edge of each FB profile runs a concealed LED channel. Slide a strip in and the ceiling picks up a wide, even wash of indirect light — dramatic in the evening, invisible during the day. The LED strip itself is not included, leaving the choice of warmth and brightness to you.

Serious size without the plaster problems

In plaster, a cornice this size means two installers, mechanical fixings and a nervous look at an older ceiling. In XPS (extruded polystyrene) it means one person, a tube of solvent-free adhesive and no load worth mentioning. The material flexes with the building rather than cracking, and its closed-cell structure resists moisture where plaster slowly fails.

Models and sizes

• Five designs: FB-34, FB-35, FB-36, FB-37, FB-38
• Two sizes each: A (105 x 190 mm) and B (105 x 290 mm)
• Sold in 2 m lengths; packs from 2 m to 30 m (16 lengths)
• Matching internal and external corner pieces, ready-made (20 cm)
• 20 cm sample for judging scale and testing paint — not for installation use

Installation

Adhesive must be solvent-free and paint must be water-based — both rules exist because solvents attack polystyrene. No screws or drilling. Cutting is quick with a fine-tooth saw, and ready-made corners remove the most error-prone mitres. Plan two to four hours for a typical room.

Rooms that suit the FB

Generous living rooms, dining rooms, master bedrooms and hallways with height to spare. Kitchens and bathrooms work too, thanks to the moisture resistance of XPS (extruded polystyrene).

Why Decovision

Large-format profiles in genuine XPS (extruded polystyrene), factory corners, UK manufacture and an affordable sample service. Order the FB sample, offer it up to your ceiling, and see how much difference 105 mm makes before committing to the full packs.

The GB Series is LED coving for ceilings that lets you add a crisp cornice line and soft indirect lighting in a single piece. It is made from XPS (extruded polystyrene) — a dense, smooth, closed-cell foam that is far finer-finished than the bead-style polystyrene most people picture, yet so light you can hold a full two-metre length overhead with one hand. Manufactured by Decovision in the UK.

Built-in LED channel

Each GB profile carries a concealed channel behind the top edge for an LED strip. The strip sits out of sight and washes the ceiling with an even glow — indirect lighting that makes a room feel taller and calmer than a bare pendant ever will. LED strip is not included, so you are free to choose the colour temperature and brightness you prefer.

Light enough for one person to fit

A typical GB length weighs a fraction of its plaster equivalent. That means no second pair of hands, no specialist fixings and effectively zero load on the ceiling — a real advantage in older UK homes where plaster and joists have seen a century of service. Unlike plaster, XPS (extruded polystyrene) will not crack as the building moves, and unlike bead foam it takes paint smoothly with no orange-peel texture.

Models and sizes

• Three profile designs: GB11, GB12 and GB13
• Three sizes per design: A (70 x 140 mm), B (70 x 190 mm) and C (70 x 290 mm)
• Supplied in 2 m lengths; packs from 2 m up to 30 m (16 lengths)
• Ready-made internal and external corner pieces — no tricky mitre cuts
• Sample piece (approx. 20 cm) for checking the profile, material and paint finish before you commit — not for installation

Installation

Fix with a solvent-free grab adhesive only — solvent-based products attack polystyrene. No screws or drilling are needed. Once fitted, finish with water-based paint (again, solvent-based paints must be avoided). An average room takes two to four hours from first length to finished corners.

Where it works

Living rooms and bedrooms are the classic homes for LED coving; the closed-cell structure of XPS (extruded polystyrene) also shrugs off moisture, so kitchens and bathrooms are no problem. Hallways and home offices benefit from the extra sense of height the uplight creates.

Why Decovision

Lightweight XPS (extruded polystyrene) quality rather than cheap bead foam, ready-made corners, UK manufacturing, and a low-cost sample service. Order a GB sample first, test it against your ceiling and your paint, then come back for the full room.

With a generous 90 mm drop, the GC Series is the deep-profile option in Decovision's LED coving range — cornice moulding with real presence for rooms that can carry it. Like all our coving it is cut from XPS (extruded polystyrene): a rigid, closed-cell foam with a smooth face that paints beautifully, at around a tenth of the weight of plaster. Made in the UK by Decovision.

Indirect lighting, hidden hardware

The GC profile conceals an LED channel along its upper edge. Run a strip inside it and the ceiling above glows with soft, even light while the strip itself stays completely hidden. It is the simplest route to the "floating ceiling" look — no plasterboard box-work, no electrician-built pelmet. LED strip not included, so you can match the colour temperature to the room.

Why weight matters

A deep plaster cornice of this size is a two-person lift and a genuine load on old lath ceilings. The GC in XPS (extruded polystyrene) is light enough to position one-handed, puts effectively no weight on the structure, and flexes with seasonal building movement instead of cracking along the joint line.

Sizes and packs

• Three profile widths: GC-A (90 x 155 mm), GC-B (90 x 190 mm), GC-C (90 x 290 mm)
• 2 m lengths, sold in packs from a single 2 m length to 30 m (16 lengths)
• Matching internal and external corners ready-made (20 cm)
• 20 cm sample available — ideal for testing profile scale, surface and paint before ordering a full room; samples are not for installation

Fitting notes

Use a solvent-free adhesive only and finish with water-based paint — solvent products damage polystyrene. No mechanical fixings are required. Most rooms are done in an afternoon: measure, cut with a fine saw, bond, fill the joints, paint.

Best rooms for a deep profile

High-ceilinged living rooms, dining rooms and master bedrooms take the GC naturally. Because XPS (extruded polystyrene) is closed-cell and moisture-resistant, it is equally at home above kitchen units or in a bathroom.

Why Decovision

Genuine XPS (extruded polystyrene) rather than soft bead foam, factory-made corners that save the hardest cuts, UK production, and an inexpensive sample so you can see the profile on your own ceiling line first. Start with a sample — the full packs will still be here tomorrow.